International Research Journal of Mechanical Engineering

International Research Journal of Mechanical Engineering Vol.  2 (11) pp. 247-253, November, 2014.  © International Scholars Journals

Full Length Research Paper

synthesis method for oxy-hydrogen gas and effect on the performance of internal combustion engine

*Mohammed Yadav, Chandragupta Hamid and Shankar E.

Mechanical and Manufacturing Engineering Department, Faculty of Engineering, University of Calicut, Malappuram, India.

E-mail: [email protected]

Accepted 8 October, 2014

Abstract

In order to overcome the drawbacks of the regular petroleum fuel, it is the need of time to completely or partially replace the petroleum fuel. But alternative options to petroleum fuel are having disadvantages. An electric or compressed air driven cars cannot be used where high torque is required or using hydrogen as fuel requires very costly storage equipments. In this research work an attempt has been made to reduce the drawbacks of petroleum fuels. Electrolysis of water can give us hydrogen in form of oxy-hydrogen gas which can be used as an alternative fuel for any internal combustion engine. This research paper discusses various methods designed for the production of oxy-hydrogen gas. Later blend of ‘oxy-hydrogen gas’ and petrol or diesel is used instead of only petrol/diesel to study the influence of the ‘oxy-hydrogen gas’ on the performance of the internal combustion engine. Oxy-hydrogen gas is an enriched mixture of ‘hydrogen’ and ‘oxygen’ bonded together molecularly and magnetically. Oxy-hydrogen gas is produced by electrolysis of water using caustic soda or KOH as the catalyst. Presence of ‘oxy-hydrogen gas’ during combustion process decreases the ‘brake specific fuel consumption’ and also increases the ‘brake thermal efficiency’. Water is one of the by-products of the combustion process which also decreases the temperature of the combustion process. It is safe to use ‘oxy-hydrogen gas’ as it is not stored but is produced and used as and when required. Together with ‘brake thermal efficiency’ engine shows improvement in the ‘brake thermal efficiency’ with the blend of fuel. All together it has been observed that the blend of ‘oxy-hydrogen gas’ and petrol instead of only conventional fuel improves the performance of the engine.

Key words: Oxy-hydrogen gas, alternative fuels.