African Journal of Environmental Economics and Management

African Journal of Environmental Economics and Management ISSN 2375-0707 Vol. 5 (1), pp. 278-285, January, 2017. © International Scholars Journals

Full Length Research Paper

A study of the heavy metals and their level in the solid and liquid  waste in Uttarakhand state of India

Sanjeev Ajit¹, Mishra Naqvi¹ and Vinay Maneka²

¹College of Renewable Energy & Environmental Engineering, Sardarkrushinagar Dantiwada Agricultural University, Palanpur, Gujarat, India.

²Centre for Environmental Planning and Technology University, Ahmedabad, Gujarat, India.

Accepted 12 November,  2016

Abstract

The aim of this study was to estimate the heavy metals and their level in the solid and liquid (municipality waste and industrial effluent) waste in Uttarakhand state of India. It is the part of my research on IN SITU bioremediation. 62 samples from 32 cities of Uttarakhand were collected according to standard method of APHA in triplicate. The heavy metals viz. Zinc (Zn), Manganese (Mn), Nickel (Ni), Copper (Cu), Chromium (Cr), Cadmium (Cd), Lead (Pb) and Cobalt (Co) were reported in the waste samples. Mercury and Arsenic were not detected in any set of sample. The metal Zinc was measured in maximum extent in all the samples. The metals Zn, Mg, Ni, Cu, Cr, Cd, Pb and Co were measured minimum 0.45mg/l, 0.28mg/l, 0.021mg/l, 0.005mg/l, 0.018mg/l, 0.001mg/l and 0.002mg/l and maximum 11.9mg/l, 55.5 mg/l, 7.6 mg/l, 6.503 mg/l, 8.56 mg/l, 8.56 mg/l, 8.56 mg/l and 0.905 mg/l respectively. The heavy metals in waste can pose serious health problems in human also. It is recommended that periodic analytical testing of heavy metal should be carried out for maximum permissible level. Primary treatment is required for the quality of the waste/effluent.

Keywords: Heavy Metal Toxicity, ICP-MS, e-waste, effluents, permissible limit.